23
By using the UP and DOWN keys it is possible to select the set-point to modify: SC1 summer set-
point.
Press the ENTER key to modify the value.
In units fitted with the IAV or IAA accessory (factory fitted accessories), the set-point can be
modified by using a remote signal.
Operation can be enabled by using the remote set-point function.
From the adjustment menu, select the remote set-point menu and press the ENTER key.
Use the UP and DOWN keys to modify the value.
Press the ENTER key to confirm.
Press the ENTER key.
Second set-point (accessory).
The setting of second set-point value is password-protected.
The second set-point is a value expressed in Kelvin which indicates the temperature difference of
the set-point obtained by its enabling.
The value can be set and then, only for units equipped with the IAS accessory (factory fitted
accessory), enabled or disabled.
From the adjustment menu, select the second set-point menu and press the ENTER key.
The remote set-point can be enabled or disabled by using the UP and DOWN keys.
Press the ENTER key to confirm.
7.4
Unit Status
The unit status can be displayed.
Press the ENTER key to access the main menu.
By using the UP and DOWN keys it is possible to choose between the second machine set-point in
the heating or cooling operating mode.
Once the second set-point you wish to change has been selected, press the ENTER key and set the
desired value by using the UP and DOWN keys.
Press the ENTER key to confirm.
Select the Unit Status menu.
Press the ENTER key to access the Unit Status menu.
Remote set-point (accessory)