Trane LIFT 162-P-1204-P, Установка, эксплуатация и обслуживание, Страница: 2 / 30

2
GENERAL 4 MAINTENANCE 29
1.1 PRELIMINARY PRECAUTIONS 4 8.1 MAINTENANCE 29
1.2 DOCUMENT INFORMATION 4 8.2 WEEKLY CHECKS 29
1.3 RANGE 5 8.3 MONTHLY CHECKS 29
1.4 ACCESSORIES 5 8.4 ANNUAL CHECKS 29
1.5 COMPLIANCE 5 8.5 WATER CIRCUIT 29
1.6 MACHINE IDENTIFICATION 5 8.6 REFRIGERANT CIRCUIT 30
1.7 INTENDED USE 5 8.7 DECOMMISSIONING AND DISPOSING 30
1.8 GENERAL PRECAUTIONS 5
1.9 BASIC SAFETY RULES 6
1.10 RESIDUAL RISK 6
1.11 USER GUIDELINES 7
1.12 MACHINE DESCRIPTION 7
SHIPMENT 8
2.1 INSPECTION ON RECEIPT 8
2.2 POSITION OF THE EQUIPMENT 8
2.3 EQUIPMENT 8
2.4 STORAGE 8
2.5 HANDLING 8
2.6 UNPACKING 9
2.7 ACCESS TO INTERNAL PARTS 9
2.8 RESTING ON THE GROUND 10
INSTALLATION 11
3.1 INSTALLATION LOCATION REQUIREMENTS 11
3.2 OPERATING LIMITS 11
3.3 UNIT LOCATION 11
3.4 VERIFYING CLEARANCES (CLEARANCE AREA) 12
WATER CONNECTIONS 13
4.1 CONNECTION DIAGRAM 13
4.2 POSITION OF CONNECTIONS 13
4.3 HYDRAULIC DATA 13
4.4 CONNECTION TO THE SYSTEM 14
4.5 PV3E EVAPORATION CONTROL 14
4.6 PV3C COLD START 15
ELECTRICAL CONNECTIONS 16
5.1 MACHINE CONNECTION 16
5.2 CONNECTIONS OF THE ACCESSORIES 16
COMMISSIONING 17
6.1 PRELIMINARY INSPECTIONS 17
6.2 FIRST START-UP OR RESTART AFTER LONG
INACTIVITY
17
6.3 SHUT-DOWN 17
6.4 FLOW RATE CALIBRATION 18
CONTROL PANEL 19
7.1 USER INTERFACE 19
7.2 SWITCH ON AND OFF 21
7.3 SETTINGS 21
7.4 UNIT STATUS 23
7.5 ALARMS 25
7.6 LOGIN 27
7.7 SOFTWARE 27
7.8 ELECTRIC CONTROL INFORMATION 27