Trane IntelliPak CGAF Series, Программирование, Руководство по устранению неисправностей

Страница: 15 / 68

15
General Information
Password Protected Screens
Some of the operating displays on the Human Interface LCD screen are intended to be accessed by qualified users only,
and require a password to change. The following screens display the various programming sections that require a password
in order to view or to modify the preset operating parameters. The password for each screen is a different series of + (Plus)
or - (Minus) key strokes in a predefined sequence. Shown below are the password protected screens, and the passwords for
accessing them.
The following screens display the various programming sections that require a
specific PASSWORD to be entered by a qualified operator in order to view or
to modify the operating parameters.
The following screen will appear if the PASSWORD is not entered within approximately
15 seconds.
1. Press the NEXT key until the following screen is displayed.
2. Press the + or - keys in this sequence ( + - - - ) to access this restricted screen.
3. Press the ENTER key to confirm the password and enter the menu.
4. Press the NEXT key until the following screen is displayed.
1. Press the + or - keys in this sequence ( - + + ) to access this restricted screen.
2. Press the ENTER key to confirm the password and Lock the definitions.
3. Press the NEXT key until the following screen is displayed.
1. Press the + or - keys in this sequence ( - + + -) to access this restricted screen.
2. Press the ENTER key to confirm the password and Lock the definitions.
3. Press the NEXT key until the following screen is displayed.
Password Entry Time Limit Exceeded
Configuration is Password Protected
Please Enter Pasword:
Diagnostic Reset is Password Protected
Please Enter Pasword:
Diagnostic Log is Password Protected
Please Enter Pasword: __________