Trane BMSC000AAA011000 Скачать руководство пользователя страница 43

Страница: 43 / 46

BAS-SVU025A-EN

LEDs and the 7-Segment Display

Interpreting the 7-Segment Display

The 7-segment display shows the operating status of the Tracer SC.

Normal startup sequence:

8, 7, 9, 5, 4, -L, dancing dashes

Shutdown sequence:

Press power button. LED displays 3, -, 2, - 1 - until the application shuts down.

Press the power button to turn power off.

Table 2.

7-segment display: Codes and interpretation

Red/Green LED

7-segment display

Indicates...

Green

Processor in reset, or no functioning software. A persistent “8” means
that service is required.

Green

Starting level 1 boot loader

Green

Starting level 2 boot loader

Green

Entering operating system. A persistent “5” means the operating
system is malfunctioning.

Green

4 (this number remains for a few seconds) Booting operating system.

Green

–L

Loading and initializing main program.

Green

“Dancing dash” dashes flash one at a time:
top, middle, bottom

Normal operation

Green

3, -, 2, -, 1, -
(sequence repeats)

Power button was pressed and Tracer SC is shutting down. May take 10
or more seconds.

Green

3, 2, 1
(sequence repeats)

Main program shutting down due to reboot command. In most cases,
the main program will be restarted.

Flashing Red

7 F

Mismatch between level 1 boot loader and hardware. Service is
required.

Flashing Red

7 H

Hardware failure. SC will probably need to be replaced.

Flashing Red

7 A

Missing level 2 boot loader.

Flashing Red

7 U

Mismatch between level 2 boot loader and hardware.

Green

Single digit during operation

Rotary switch was changed. The new setting of the changed switch is
displayed on the 7-segment LED for several seconds.

U, P, d

Firmware update is in progress.

d, o, n, E

Updating of the operating system is finished. The Tracer SC can be
powered off, the SD card removed, and the Tracer SC restarted.

F, o, r, C, E

Rotary switches set to 999; forced return to factory defaults in
progress.

C, L, E, A, r

Tracer SC is restoring factory defaults (whether by force return, UI
command, or at the beginning of a database restore operation).

Database restore in progress.

Flashing Red

H, O, L, d

Main program is delayed due to multiple crashes (may take up to 4
hours).

Red

Cannot load operating system. May be remedied by SD-card update
with appropriate software version.

Flashing Green

Power button was pressed when main program was not running/not
responsive. SC is shutting down; wait for LEDs to turn off.

Содержание BMSC000AAA011000















































Результаты поиска

Содержание BMSC000AAA011000

Отзывы:

Похожие инструкции для BMSC000AAA011000

Бренды по названию

Популярные бренды

Trane BMSC000AAA011000, Руководство по эксплуатации

Результаты поиска

Содержание BMSC000AAA011000

Отзывы:

Похожие инструкции для BMSC000AAA011000

Бренды по названию

Популярные бренды