Drive and Cabinet
AFDG-SVU01L-EN
17
Lifting the Drive
WARNING
Heavy Objects!
Failure to properly lift unit could result in death or
serious injury. Do not use cables (chains or slings)
except as shown. Each of the cables (chains or slings)
used to lift the unit must be capable of supporting the
entire weight of the unit. Lifting cables (chains or
slings) may not be of the same length. Adjust as
necessary for even unit lift. Other lifting arrangements
may cause equipment or property-only damage.
WARNING
Improper Unit Lift!
Failure to properly lift unit could result in death or
serious injury or possible equipment or property-only
damage. Test lift unit approximately 24 inches (61 cm)
to verify proper center of gravity lift point. To avoid
dropping of unit, reposition lifting point if unit is not
level.
Important:
AFDG (remote-mounted) and AFDU (unit-
mounted) have differing lift point locations
and lifting procedures. For AFDG, refer to
refer to
, associated text, and
Figure 6.
Lift point locations for AFDG (remote-
mounted)
Table 2.
Drive weights for AFDG (remote-mounted)
Voltage
Drive Panel SRRL
Amp Rating
Frame
Weight (lb)
460/480
169
D3
989
213
1019
268
D4
1121
321
1144
394
1187
480
E2
1504
524
1533
603
1531
649
1634
693
F3
2885
791
2885
933
2885
1031
2885
1227
F4
3419
1360
3419
575/600
138
D3
989
171
1019
215
D4
1121
258
1145
306
1187
356
1217
400
E2
1504
444
1539
507
1595
560
1681
649
F3
2885
756
2885
840
2885
942
F4
3419
1120
3419