Ceiling Installation
1. Set the suspension bolts and adjust the distance from the unit to the ceiling before hanging the
unit.
2. Fix the hanger bracket to the suspension bolt. Make sure that the extended suspension bolt is
firmly seated into the ceiling support.
3. Lift the unit and slide it forward until it is in place in the hanger brackets.
4. Tighten both hanger bracket setting bolts (M8).
5. Tighten both hanger bracket fixing bolts (M6) to prevent displacement of the indoor unit.
6. Adjust the height so the rear side of the drain plpe is at a slight decline for improved
condensate drainage.
7. Reinstall and tighten the right and left side panels.
NOTE: Only the specified accessories and parts for installation work should be used.
WARNING
Adequate Support Required!
The wall/ceiling structure must be adequate to support 4 times the weight of the unit. Failure to
ensure adequate structural support could result in the unit falling from its location which could
result in death, serious injury, or equipment or property-only damage.
13
Floor and Ceiling Unit
