
4) Open the lid.
5) Remove the cooking grate and the cast-iron hot plate from the grill.
6) Remove the protective covers from the chosen burners.
7) Remove the screws that attach the chosen burner to the cookbox and carefully
remove the burner (Pic. 31).
8) Position the new burner in the original place of the old burner. Make sure the gas
injector is inside the gas input hole of the burner and only the screwsand tighten
them. (Pic. 32).
NOTE: The burner must be assembled with the gas output holes down so that the
flat edge is facing up as shown in picture 33.
CAUTION
• The ignition electrodes must never be subjected to impact when grill is handled as
this might damage the system.
DANGER
• Failure to comply with these instructions might result in an explosion or a fire,
causing damage to property, personal injury, or even death.
10.11. STORING THE GRILL
When the grill is not in use, all gas supply must be disconnected according to the
“Gas Connections” instructions.
11. DISCARDING
Please refer to current legislation in your country regarding the safe disposal of the
packaging, residue generated by the cooking process, parts, or of the grill itself.
Never discard/burn domestic waste or any other type of waste in your grill.
Picture 33
The flat part must be
in the top side
Picture 31
Picture 32
Gas
input
Injector
14
Содержание TGP-4700/G3543B-SB
Страница 1: ...Safety and Instruction Manual Gas grill 26500 020 TGP 4700...
Страница 2: ......