• The Crossfader is all the way to the left.
• The channel fader A is raised to the top.
• The
MAIN
knob has an adequate level.
3.3.1
Looping by Pre-defined Sizes
In LOOP mode, the first row of pads lets you trigger looping of a track by pre-defined values.
By default, these are (from left to right) 1/8, 1/4, 1/2 or 1 beat.
To engage a loop:
1.
Press the Deck's
PLAY
button to start playback.
2.
Press the Deck's
LOOP
button to enable LOOP mode.
The LOOP button lights up brightly and the pads also illuminate.
3.
With a track playing and LOOP Mode enabled, you can perform the following actions:
►
Press one of the green pads to engage a Loop of 1/8 beat, 1/4 beat, 1/2 beat, or 1 beat.
The LED ring around the LOOP encoder starts to rotate to indicate a loop is active.
►
Press the same green pad again or press the LOOP encoder to disengage the Loop.
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
TRAKTOR KONTROL S8 - Manual - 89
