►
Hold the left
SHIFT
button, and then press the active pads one by one to reset each play-
head to the Sample start position.
Just like Track Decks the Remix Decks can become out-of-phase at times, even when they
have their corresponding
SYNC
button engaged. The Touch Strip provides you with immedi-
ate visual feedback (via its LEDs) to allow you to make necessary adjustments.
You cannot use the Touch Strip for seeking functions on a Remix Deck.
3.7
Capturing Samples from Track Decks (Using Remix Mode)
You can create your own Remix Sets by sampling parts of a track playing back on a Track
Deck.
Note: in Remix Mode, you can only capture samples to the current Remix Set page! Select a
different Remix Page to save to before beginning the capture.
The Capture Source must always be a Track Deck.
Prerequisites
• The track “Techno 1” is loaded and stopped on Deck A.
• Deck C is set up as an empty Remix Deck.
• The Crossfader is set to center position.
• Channel faders A and C are raised to the top.
• All Slot Volume Faders are raised to the top.
• The EQ knobs are set to center position.
Capturing a Sample and Playback
To capture a Sample of a track:
1.
On the left Deck, set the focus on Deck
A
.
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
TRAKTOR KONTROL S8 - Manual - 112
