Traktor Kontrol S8 Скачать руководство пользователя страница 196

Страница: 196 / 264

• Press

CUE

PLAY

and the Deck will keep playing after releasing the buttons.

• Press

SHIFT

CUE

to skip back to the beginning of the track.

SYNC Button

The

SYNC

button activates/deactivates the synchronization of the currently focused Deck to

the Tempo Master (i.e. the Deck set as the

MASTER

or TRAKTOR's Master Clock).

SYNC Button when in Sync

►

While playing, press

SHIFT

SYNC

to set a Deck as the Tempo Master.

→

The Deck's tempo becomes the tempo reference for all other synced Decks and FX. S8's
display shows

MASTER

in the Deck header of the Master Deck.

The

SYNC

button takes on different states to provide visual feedback:

• If the

Deck

is BPM-synced and in phase with the Tempo Master, the button is bright

green.

• If the

Deck

is BPM-synced but out of phase with the Tempo Master, the button is bright

red.

• If the Deck is unsynced, the button is dim green.

If a focused Deck gets out of phase, you can compensate by:

►

Swiping your finger across the corresponding Touch Strip to re-align the beat phase.

►

Pressing the

SYNC

button twice to snap back into

SYNC

with the Tempo Master.

For further information about Deck

SYNC

and

MASTER

Deck assignment, refer to section

↑

4.4.2.4, TEMPO Encoder

Hardware Reference

The Deck

TRAKTOR KONTROL S8 - Manual - 196

Содержание Kontrol S8









































































































































































































































































Результаты поиска

Содержание Kontrol S8

Отзывы:

Похожие инструкции для Kontrol S8

Бренды по названию

Популярные бренды

Traktor Kontrol S8, Руководство пользователя

Результаты поиска

Содержание Kontrol S8

Отзывы:

Похожие инструкции для Kontrol S8

Бренды по названию

Популярные бренды