Slicer Mode
The Slicer Mode extends the Freeze mode's functionality. Press the
LOOP
button while in
Freeze mode and the playback behavior of the pads changes: Instead of playing from the slice
start to the end of the entire track, pressing and holding a pad in Slicer Mode will play back
just the corresponding slice in a loop.
In Slicer Mode, the pads turn green and while playing back the selected loop, pads flash
bright green while the assigned slice is played back. This is also reflected on the Deck's
display.
See also
2
4.2.3.4 REMIX Button
Remix mode is the default for Remix Decks, and isn't available for Track Decks. If a Track
Deck is in focus, the
REMIX
button is deactivated for that Deck.
REMIX Button
Remix mode allows you to capture portions of a track from the capture source and assign them
to one of the pads:
1.
Set the capture source by pressing and holding the
CAPTURE
button while turning the
Loop encoder.
2.
Press an empty pad to sample from the Capture source and to assign the captured con-
tent to that pad. The capture length is determined by the source Deck's loop size.
3.
Press the pad again to trigger the captured content.
→
You have captured a piece of music that you can trigger during your performance.
If the Deck you set as capture source is empty, S8's display shows
Error while copying
in the
Deck header.
For more detailed information on capturing samples, refer to section
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 170
