50
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
6.6
Cooling Circuit
–
Drain System
Tools needed before undertaking this task:
Figure 6.6.1 Filling Bottle
Figure 6.6.2 Distilled Water
Figure 6.6.3 Cellulose Rags/Towels
Figure 6.6.4 Empty Containers (Water Bottles Shown)
CAUTION
- ALWAYS USE PUREST POSSIBLE DISTILLED WATER. Any other fluid will void warranty
1)
Turn off printer, unplug power cord
Figure 6.6.5 Unplug Power Cord
2)
Gain access to the pump/reservoir assembly
3)
Using the filling bottle, remove as much liquid you can from the reservoir
4)
Unplug the inlet pipe to the reservoir
