15
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
12)
Mount the heat bridge with desired configuration (Normal or HI TEMP)
Figure 3.3.9 Extruder Heat Bridge
13)
Lock the extruder with the setting screw using the dynamometric screwdriver (1.3 Nm)
Figure 3.3.10 Lock the Extruder Set Screw
14)
Mount the tube adapter. Holding the heater with specific tool, lock the nozzle using the
dynamometric screwdriver (1.3Nm)
Figure 3.3.11 Holding Heater & Locking the Nozzle
15)
Perform a Z nozzle alignment.
See Section
Z Nozzle Comparison -3 Nozzles Relative Z Position Calibration
for Procedure
