95
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
7)
Replace extruder block holder plate, then reverse procedure to re-assemble
Figure 6.29.7 Extruder Block Holder Plate
6.30
Print Plate Repair Procedure
Before starting this procedure, you will need:
•
A syringe with black glue
•
Magnets to be glued
•
Hardware tools to clean holes (le, sanding paper)
•
Masking labels
•
A printer of the same type for the plate being repaired (to later cure it)
Repair Procedure:
1)
Clean the magnet hole on the printer plate
•
Clean any glue residual from the hole
•
Be sure that magnets have some clearance to let glue penetrate between carbon fiber and
magnet walls
–
use a drill bit or a le to get to a bigger clearance if needed
•
Do not force the magnet into the hole
•
Be sure to remove any dust
