22
Placement of the machine
When placing the machine, you need to be aware of a couple of a number of issues, namely;
-
The tire changer must be connected to the main electric power supply (230V)and the
compressed air system. It is therefore advisable to install the machine near these power
sources.
-
To create a safe and ergonomic alignment of the machine, it is advised to keep a minimum
distance of 50 cm from surrounding walls (fig. 2 and 3). This way all parts of the machine can
operate correctly and without restriction.
-
If the machine is installed outside it must be protected by a lean-to.
Fig. 3
Fig. 2
Fig. 3
Содержание ZH650
