Installation
64
Installing a system board module
To install a system board module:
1.
Align the system board assembly in the chassis. Make sure the system board assembly is seated
correctly on all sides of the system board.
2.
Use the handles to slide the system board towards the rear of the chassis and into the I/ O slots. The
I/ O ports are flush in the chassis slots when the system board is installed correctly.
3.
Secure the system board to the chassis with the csrews, see the following figure.
4.
Connect the cables to the system board.
5.
Install the processors (on page59).
6.
Install the memory modules (on page56).
7.
Install the OCP mezzanine card (on page 54).
8.
Install the PCIe card (on page48) or the expander board (on page 51).
9.
Install the air baffle (on page 31).
10.
Install the system fan (on page 34).
11.
Install the access panel (on page 29).
