Installation
45
Front control boards
Removing a front control board
To remove a front control board:
1.
Power off the server and detach all of the power cords from the power supplies.
2.
Remove the access panel (on page 29).
3.
Remove all HDD assemblies(on page 26).
4.
Remove the HDD backplane (on page 39 or page 42).
5.
Disconnect the cable fromthe system board.
6.
Remove the screw securing the front control board assembly to the chassis.
7.
Pull the front control board assembly through the chassis bay. Make sure the cable does not get
caught in the bay while removing the assembly.
8.
Remove thescrews securing thefront control board to the front control bracket.
9.
Remove thefront control board.
