Installation
46
Installing a front control board
To install a front control board:
1.
Align the LEDs on the front control board with the slots on the front control brackte.
2.
Install the front control board into the front control bracket.
3.
Secure the front control board to the front control bracket with screws.
4.
Slide the cable through the chassis bay and pull it through while sliding the front control board into
the chassis.
5.
While pulling the cable connector, slide the front control board assembly into the chassis until it is
flush in the bay.
6.
Secure the front control board assembly to the chassis with a screw.
7.
Connect the cable to the system board.
8.
Install the HDD backplane (on page 40 or page 43).
9.
Install all HDD assemblies(on page 26).
10.
Install the access panel (on page29).
