Installation
51
5.
Remove the screw securing the expander board to the riser bracket.
6.
Remove the expander board from the bracket.
Installing an expander board
This section applies to SKU2 model only.
To install an expander board:
1
.
Position the expander board on the riser bracket. The contacts on the expander ba
ord face outward.
2
.
Slide the expander board in place. The tab on the expander board is inserted in the rear of the riser
bracket. The screw holes on the board and bracket line up indicating a correct alignment.
3
.
Secure the expander board to the riser bracket with a screw.
