TracVision M1 User’s Guide
35
Chapter 4 - Setup
Manual Mode Setup
If none of the automatic modes described earlier include all of the
satellites you wish to track, you can set up the system in Manual mode
to track up to five satellites of your choice. You will then be able to
switch between these satellites using the buttons on the interface box.
Follow the steps in Figure 17 to set up the antenna in Manual mode.
NOTE:
If the status screen does not show “SYSTEM NEEDS SETUP,”
follow the steps in
“Resetting the System to Change Setup” on page 36
.
Figure 17 Manual Mode Setup
Press any button
to begin.
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE ACCEPT
SAT 2 OF 5= NONE?
CHANGE ACCEPT
INSTALLING SATS
XXX XXX XXX XXX XXX
RESTARTING ANTENNA
Press CHANGE until
SERVICE= MANUAL
is displayed.
SERVICE= MANUAL?
CHANGE ACCEPT
SAT 1 OF 5= 101?
CHANGE ACCEPT
Press CHANGE until
the display shows the
desired satellite: 61,
72, 82, 91, 101, 110,
119, 129, 148 or
NONE. Then press
ACCEPT.
Repeat this procedure for satellites
3-5. Then press ACCEPT.
