TracVision M1 User’s Guide
16
Chapter 2 - Operation
Changing the Satellite Switching Mode
Unless your system is set up in Manual mode, the antenna will
automatically switch satellites as you change channels using the
receiver’s remote control. However, if you want to manually select a
satellite for some reason, the interface box allows you to switch from
automatic to manual switching. (You can also switch back to
automatic switching using this same menu function.)
Follow the steps in the flowchart below to change the satellite
switching mode.
Figure 8 Satellite Switching Mode
Press MENUS until
DIAGNOSTICS= No is displayed.
DIAGNOSTICS= NO
NEXT MENU CHANGE
DIAGNOSTICS= YES?
CHANGE ACCEPT
ENTERING DIAGNOSTICS
SYSTEM RESET= NO
NEXT MENU CHANGE
Press MENUS until
SAT SWITCH= AUTO
is displayed.
SAT SWITCH= AUTO
NEXT MENU CHANGE
SAT SWITCH= MANUAL
SAT SWITCH= MANUAL?
CHANGE ACCEPT
