TracVision M1 User’s Guide
25
Chapter 4 - Setup
ExpressVu Setup
You can set up the system for any one of the
following ExpressVu operating modes:
Step 1 - Set the Operating Mode in the Antenna
Follow the steps in Figure 11 to set up the antenna for your selected
ExpressVu operating mode. Then keep the antenna turned on for the
next step.
NOTE:
If the status screen does not show “SYSTEM NEEDS SETUP,”
follow the steps in
“Resetting the System to Change Setup” on page 36
.
Figure 11 ExpressVu Setup
Mode
Satellites Tracked
Dual-Sat
91 and 82
Single-Sat
91 only
MODE= DUAL-SAT?
CHANGE ACCEPT
Press any button
to begin.
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE ACCEPT
RESTARTING ANTENNA
Press CHANGE until
the desired mode is
displayed. Then press
ACCEPT.
MODE= SINGLE-SAT?
CHANGE ACCEPT
INSTALLING EXVU SATS
XX XX
Displays satellites
installed for the
selected mode.
SERVICE= EXPRESSVU?
CHANGE ACCEPT
Press CHANGE until
EXPRESSVU is
displayed.
