TracVision M1 User’s Guide
29
Chapter 4 - Setup
Step 1 - Set the Operating Mode in the Antenna
Follow the steps in Figure 14 to set up the antenna for your selected
DISH Network operating mode. Then keep the antenna turned on for
the next step.
NOTE:
If the status screen does not show “SYSTEM NEEDS SETUP,”
follow the steps in
“Resetting the System to Change Setup” on page 36
.
Figure 14 DISH Network Setup
MODE= DISH 1000/129?
CHANGE ACCEPT
Press any button
to begin.
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE ACCEPT
RESTARTING ANTENNA
Press CHANGE until
desired mode displays;
then press ACCEPT.
MODE= DISH 1000/61?
CHANGE ACCEPT
MODE= DISH 500?
CHANGE ACCEPT
INSTALLING DISH SATS
Displays satellites
installed for the
selected mode.
SERVICE= DISH?
CHANGE ACCEPT
