TracVision M1 User’s Guide
6
Chapter 1 - Introduction
System Components
The TracVision M1 system includes the following components:
The
antenna
uses integrated DVB technology to
quickly acquire and track the correct satellite,
switch between satellites, and send TV signals to
the interface box. Internal gyros allow the
antenna to track the satellite at all times, even
while you’re on the move!
The
multi-service interface box/controller
supplies power to the antenna and delivers
satellite TV signals to your satellite TV
receiver. The interface box also allows you
to set up the system using the pushbuttons
and LCD display.
NOTE:
Henceforward, this manual uses the term “interface box” to refer to
the multi-service interface box/controller.
Compatible Receivers
To ensure compatibility with the TracVision system, KVH
recommends the receiver models shown in the table below. These
receivers have all been validated by KVH to work well with the
TracVision system.
For information on connecting different receiver models,
contact KVH Technical Support at 401-847-3327.
Figure 3 KVH-Validated Receivers
Standard-Definition Models
DIRECTV
DISH Network
ExpressVu
D12
D11
D10
311
211k
211
3100
4110
High-Definition (HD) Models
DIRECTV
DISH Network
ExpressVu
HD not
supported
211k
211
6100
6131
