
TracPhone V3-IP User’s Guide
66
Network Configuration
Physical Ethernet Port Configurations
By default, all four “User Ethernet” ports on the rear panel of the ICM
are set up for a standard LAN configuration – the ICM assigns IP
addresses to all devices connected to its network. However, at the
TracPhone V3-IP web interface, you can modify the ICM to support
any of the following alternate configurations:
•
“Static IP Port Configuration” on page 67
•
“Dual Dome Port Configuration” on page 68
•
“Legacy Port Configuration” on page 69
To select a physical Ethernet port configuration, follow these steps:
1.
At the TracPhone V3-IP web interface, click the
Settings
tab.
Then click
Network Settings
.
2.
In Physical Ethernet Port Configuration, click
Edit
.
3.
If the Login window appears, log in with the Administrator
password.
Important!
If you select the Static IP, Dual Dome-Secondary, or Legacy
configuration, you will not be able to use minivsat.kvh to access the
web interface. You will need to enter the IP address of the ICM (default
is 192.168.0.9 in Static IP and Legacy modes, 192.168.0.10 in Dual Dome
-Secondary mode). In addition, if you select the Dual Dome-Secondary
or Legacy configuration, you will not be able to change any other
settings on the Network Settings page.