
TracPhone V3-IP User’s Guide
34
No-Transmit Zones
Configure the No-Transmit Zone(s) at the Web Interface
1.
At the TracPhone V3-IP web interface, click the
Settings
tab.
Then click
No-Transmit Zones
.
2.
Click
Edit
.
3.
If the Login window appears, log in with the Administrator
password.
4.
In No-Transmit Zone Ranges, make sure
Enforce Zones
is
selected.
5.
Enter the azimuth range for Zone 1.
6.
If you wish to set up a second no-transmit zone, enter the
azimuth range for Zone 2.
7.
Click
Save All Settings
.
8.
At the confirmation message, click
Save
.
Figure 4-4 Configuring No-Transmit Zones
Important!
When “Enforce Zones” is selected, the antenna will not transmit
whenever it points within one of your configured no-transmit zones. If
“Ignore Zones” is selected instead, the zones are disabled, allowing the
antenna to transmit in any direction without restriction.