TQC AB3075, Руководство пользователя

Страница: 4 / 56

4
1 GENERAL
1.1 Importance of operating manual
This manual is written in order to become familiar with all the functions and possible applications
of the instrument. It contains important instructions about how to use the instrument safely
and economically; according to the purpose designated. Following these instructions is not only
essential to avoid risks. It also reduces repair costs and down-time and increases the products
reliability and service-life.
Anyone who works with the instrument should follow the instructions in this manual, particu-
larly the safety related instructions. Additionally local rules and regulations relating to environ-
mental safety and accident prevention should be observed.
1.2 User-responsibility
The user should
a) Only allow persons to work with the instrument who are familiar with the general instructions
on how to work safely and to prevent accidents. The use of the instrument should have been
instructed duly. The safety chapter and the warnings in this manual should have been read
and understood; acknowledged as evidenced by their signature.
b) Regularly check the safety-awareness of personnel at work.
1.3 Responsibility of personnel
Before commencing work anyone appointed to work with the instrument should pay attention
to the general regulations relating to working safety and accident prevention. The safety chapter
and the warnings in this manual should have been read and understood; acknowledged as
evidenced by their signature.
1.4 Dangers
This instrument has been designed and constructed in accordance with state-of-the-art techno-
logy and the acknowledged safety regulations. Nevertheless, working with the instrument may
cause danger to the life and health of the operator or to others, or damage to the instrument or
other property. Therefore the instrument should only be used for its designated purpose, and in
a perfect technical condition. Any defect that could have a negative effect on safety should be
repaired immediately.
1.5 Designated purpose
The TQC Film applicator is exclusively designed to apply films of paint and coatings on test panels
and test charts and as from models launched after Apr. 2013 for testing of the drying time of
coatings on previous described substrates.
Other applications constitute improper use. TQC will not be held liable for damage resulting
from improper use.
EN