TQC AB3075, Руководство пользователя

Страница: 21 / 56

21
9.3 Start the instrument
Start the instrument following the steps listed in Section 8.
10 CARE AND MAINTENANCE
10.1 Inspection and Maintenance
t 5IPVHISPCVTUJOEFTJHOUIJTJOTUSVNFOUJTQSFDJTJPONBDIJOFE/FWFSESPQJUPSLOPDLJUPWFS
t "MXBZTDMFBOUIFJOTUSVNFOUBGUFSVTF
t $MFBOUIFJOTUSVNFOUVTJOHBTPGUESZDMPUI/FWFSDMFBOUIFJOTUSVNFOUCZBOZNFDIBOJDBM
means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive
cleaning agents, permanent damage.
t %POPUVTFDPNQSFTTFEBJSUPDMFBOUIFJOTUSVNFOU
t (FOFSBMMZUIF52$'JMNBQQMJDBUPSEPFTOPUSFRVJSFBOZNBJOUFOBODF
t "GUFSöOJTIJOHUIFöMNBQQMJDBUJPOUBLFPòUIFöMNBQQMJDBUPSTBOEDMFBOUIFNJNNFEJBUFMZ
Make sure that no paint or other liquids are spilled on
the electronics or left in the holes of the vacuum bed.
The film applicators are subject to some natural wear and must be inspected from time to time to
ensure that they are in fault-free condition.
10.2 Disposal of Materials
Disposal of materials used in the operation of the instrument or for auxiliary functions and ex-
changed items should be dealt with safely and in a manner that will not harm the environment.
Follow the local regulations.
10.3 Customer Service
When requesting service always include Model No. and Serial No. from device tag on rear of
machine. Customer service is provided on request by:
TQC
Molenbaan 19
2908 LL Capelle aan den IJssel
The Netherlands,
T +31 (0)10 7900100
F +31 (0)10 7900129
Email: info@tqc.eu
Danger
EN