TQC AB3075, Руководство пользователя

Страница: 16 / 56

16
7.8 Drying Time Recorder
The TQC Automated Film Applicator can be used as a Drying Time Recorder. In order to use the
TQC Automatic Film Applicator as a Drying Time Recorder following steps need to be followed:
t 3FNPWFUIF4QJSBMCBSXFJHIU GSPNESBXJOHDIBQUFSCZQVMMJOHPVUUIF4QJSBMCBSXFJHIU
guide pins(6).
t 5BLFDBSFUIBUCPUI4QJSBMCBSXFJHIUHVJEFQJOT BOE4QJSBMCBSXFJHIUHVJEFSJOHT BSF
stored in a safe place. In order to not to lose them.
t 1MBDFUIFPQUJPOBMBWBJMBCMF%SZJOH5JNF3FDPSEFS5PPMPOUIFCBSPGUIF52$"VUPNBUJD'JMN
Applicator as illustrated in below image:
8 MENU DISPLAY INFORMATION AND OPERATION
8.1 Automatic Film applicator operation
TQC Start screen after switched on.
Switch on instrument by mains switch at the right side on
the housing. This is the first screen shown after switching
on the instrument.
NOTE The version number displayed is the firmware version number.
RUN - Automatically the first selection screen or the
MAIN MENU appears
Press the Jog shuttle knob to start the sequence.
The applicator carrier bar is moved and set in position.
3A
A
Detail A scale 1:1
3B
B
Detail B scale 1:1
Click
Automatic Film Applicator
V2.01
RUN
Press START to activate the
automatic film applicator.
START
EN