TQC AB3075, Руководство пользователя

Страница: 11 / 56

11
Danger
4.5 Basic Unit
Power Supply : 115 – 230 V, 50 - 60 Hz
Power consumption : max. 80 Watt
Display : Blue Illuminated, graphic 100 x 35 mm, 193x64 pixels
Safety : Emergency Button and intelligent proximity
switches, integrated Acoustic Alarm
Function : Jog Shuttle knob by Rotation / Pushing
Drawn down Speeds : 12 steps selectable from 2 - 500 mm/s. and free selectable (custom)
Drawn down Lengths : A5 / A4 / A3 and free selectable (custom with variable starting/
stopping point), except for the heated vacuum bed which only
operates with A3. If smaller test charts are used a A3 sized paper
frame has to be created to protect the holes from paint walk.
4.6 Noise Level
The continuous noise level from the instrument does not exceed 70 dB.
5 INSTALLATION AND ASSEMBLY
5.1 Installation and Operation
The instrument has to be installed in a suitable place, preferably on a sturdy table or work area,
with normal ambient temperature. Special fixings are not required.
Carefully unpack the apparatus and the accessories and check complete supply.
Place, if necessary, a spirit level on the work surface and adjust the height of the feet.
5.2 Preparation of Energy Connections
The instrument is equipped with a safety tested mains supply cable and may only be connected
to plug sockets with earth connection complying with the safety regulations.
Before connecting the instrument, check whether
the supply voltage specified on the indication label
corresponds to the local supply voltage. If it does not,
the instrument must not be connected under any
circumstances. Contact your local supplier or TQC for
full specifications on how to set the correct voltage.
NOTE Voltage selector might be hidden, depending on model.
5.3 Vacuum Connection
Only applicable for selected applicator series. The applicator has a built in vacuum pump to
provide the vacuum bed enough under pressure to hold test charts of either A4 or A3 size. When
the size differs from the stated A4 or A3, cover up all remaining holes to the nearest larger size in
EN