TPS WP-81T Скачать руководство пользователя страница 27

Страница: 27 / 45

Page 27

11.6 Data Format

Data is returned to the RS232 port by the

WP-81T

in the following

format when requested by a PC with the ?D or ?R commands
(section 11.5):

LLLL

DDDDDDUUU

PPPPPPuuu

TTTTTToCm

dd/mm/yy

hh:mm:ss

<cr>

or B.

Data is sent to the RS232 port by the

WP-81T

in the following format

when it is sent by the

WP-81T

using the Print function (section 9.4) or

the Instant Send function (section 11.2):

LLLL

DDDDDDUUU

PPPPPPuuu

TTTTTToCm

dd/mm/yy

hh:mm:ss

where: LLLL

is the Log Number. Maximum 4 characters, right justified.
The

WP-81T

sends a Zero for instant readings (section

11.2)

is one space.

DDDDDD

is the Conductivity or TDS Data. Maximum 6
characters, right justified.

UUU

is the unit description, either “uS

”

, “mS

”

, “ppM” or

“ppK” (where

is 1 space).

is one space.

PPPPPP

is the pH Data. Maximum 6 characters, right justified.

uuu

is the unit description, sent as “pH

” (where

is 1 space).

is one space.

TTTTTT

is the Temperature Data. Maximum 6 characters, right
justified.

oCm

is the Temperature unit description. The

WP-81T

sends

“oC

” for real temperature data (where

is one space),

or “oCm” when manual temperature compensation is being
used.

is one space.

dd/mm/yy

is the date, month and year data.

is one space.

hh:mm:ss

is the hours, minutes and seconds data.

Содержание WP-81T














































Результаты поиска

Содержание WP-81T

Отзывы:

TPS WP-81T, Руководство пользователя, Страница: 27 / 45

Результаты поиска

Содержание WP-81T

Отзывы: