TPS smartCHEM-D Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 60

TPS smartCHEM-D Скачать руководство пользователя страница 35

35

9.4.2 How the GLP Alarm Operates

On the day that calibration is due, the following message will be displayed the first time the

smart

CHEM

-D

is switched on…

GLP Alarm, Calibrate
Oxygen
Conductivity/TDS
Temperature

Only those parameters that were selected (see section 9.4.1) will be displayed.

This message will not be displayed again until the next time calibration is due.

In addition to the message shown above, the

smart

CHEM

-D

also flashes the decimal point of each

parameter that requires calibration, and flashes the message “

Cal Now

” on the display.

9.4.3 Notes on the GLP Calibration Alarm function

1. To remove the “

Cal Now

” message and flashing decimal points, each selected parameter must

be correctly calibrated.

2. Switching the GLP Calibration Alarm function off will not clear “

Cal Now

” message and

flashing decimal points. The relevant parameters must be calibrated.

3. When Weekly, 2 Weekly or 4 Weekly periods have been selected, the GLP Calibration Alarm

will always be activated on the same day of the week as when the function was first activated,
even if the unit is not calibrated on that day. For example, if the GLP Calibration Alarm is
triggered weekly on a Monday and the meter is finally calibrated the following Wednesday, the
next GLP Calibration Alarm will still be on the following Monday.

9.5 Instrument Serial Number

In case the serial number that is fitted to the rear of the

smart

CHEM

-D

is removed or becomes

illegible, it is also available on the

smart

CHEM

-D

display.

1. The serial number is displayed at turn-on, for example…

smartCHEM-D V1.0mr
S1234 © 2002 TPS P/L
Oxygen, Conductivity
/TDS, Temperature

The “

m

m

” after

V1.0

is shown when the Dissolved Oxygen Stirrer output is enabled (section 3.2).

The “

r

r

” after

V1.0

is shown when the Recorder Port option is fitted.

2. The serial number is displayed when recalling the GLP information (section 9.1).

3. The serial number is included on the print-out of GLP information (section 9.3).

4. The GLP information can be downloaded to a PC using the optional Windows



software (part

number 130086).

9.6 Additional GLP Features

Another GLP requirement is to record the date and time of every reading. The

smart

CHEM

-D

does

this for you whenever readings are recorded either with the Manual Datalogging function (section
11.1) or the Automatic Logging function (section 11.2).

«
...
33
34
35
36
37
...
»

Содержание smartCHEM-D





























































Отзывы:

Нет отзывов