59
no ip http session timeout
Parameter
minutes
——The timeout time, ranging from 5 to 30 in minutes. By default, the
value is 10.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the timeout time of the HTTP server connection as 15 minutes:
T1600G-52TS(config)# ip http session timeout
15
9.4
ip http secure-server
Description
The
ip
http secure-server
command is used to enable the HTTPS server
within the switch. To disable the HTTPS function, please use
no ip
http
secure-server
command. This function is enabled by default. The HTTP and
HTTPS server function cannot be disabled at the same time.
Syntax
ip http secure-server
no ip http secure-server
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Disable the HTTPS function:
T1600G-52TS(config)# no ip http secure-server
Содержание T1600-28TS
