TP-Link T1600-28TS, Справочное руководство CLI

Страница: 232 / 365

216
26.10 spanning-tree mst instance
Description
The spanning-tree mst instance command is used to configure the priority
of MST instance. To return to the default value of MST instance priority,
please use
no spanning-tree mst instance command.
Syntax
spanning-tree mst instance instance-id priority pri
no spanning-tree mst instance
instance-id
priority
Parameter
instance-id —— Instance ID, ranging from 1 to 8.
pri
—— MSTI Priority, which must be multiple of 4096 ranging from 0 to
61440. By default, it is 32768. MSTI priority is an important criterion on
determining if the switch will be chosen as the root bridge in the specific
instance.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the MST Instance 1 and configure its priority as 4096:
T1600G-52TS(config)# spanning-tree mst instance 1 priority 4096
26.11 spanning-tree mst
Description
The spanning-tree mst command is used to configure MST Instance Port. To
return to the default configuration of the corresponding Instance Port, please
use
no spanning-tree mst command. A port can play different roles in
different spanning tree instance. You can use this command to configure the
parameters of the ports in different instance IDs as well as view status of the
ports in the specified instance.
Syntax
spanning-tree mst instance
instance-id
{[ port-priority
pri
] | [ cost
cost
]}