TP-Link T1600-28TS, Справочное руководство CLI

Страница: 145 / 365

129
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the daylight saving time from zero clock, Apr 1st to zero clock Oct
1st and the offset is 30 minutes in 2015:
T1600G-52TS(config)# system-time dst date Apr 1 00:00 2015 Oct 1 00:00
2015 30
17.5 system-time dst recurring
Description
The system-time dst recurring command is used to configure the recurring
daylight saving time. It can be configured spanning years. To disable DST
function, please use
no system-time dst command.
Syntax
system-time dst recurring {
sweek
} {
sday
} {
smonth
} {
stime
} {
eweek
} {
eday
}
{
emonth
} {
etime
} [
offset
]
no system-time dst
Parameter
sweek
——The start week of the daylight saving time. There are 5 values
showing as follows: first, second, third, fourth, last.
sday
—— The start day of the daylight saving time. There are 7 values
showing as follows: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
smonth
—— The start month of the daylight saving time. There are 12 values
showing as follows: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
stime
—— The start moment of the daylight saving time, HH:MM.
eweek
——The end week of the daylight saving time. There are 5 values
showing as follows: first, second, third, fourth, last.
eday
—— The end day of the daylight saving time. There are 5 values
showing as follows: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
emonth
—— The end month of the daylight saving time. There are 12 values
showing as following: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov,
Dec.