315
Command Mode
Interface Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Add a description system-if to the routed port 1/0/9 :
T1600G-52TS(config)# interface gigabitEthernet
1/0/9
T1600G-52TS(config-if)# no switchport
T1600G-52TS(config-if)# description
system-if
32.6
shutdown
Description
This
shutdown
command is used to shut down the specified interface. The
interface type include: routed port, port-channel interface, loopback interface
and VLAN interface. To enable the specified interface, please use the
no
shutdown
command.
Syntax
shutdown
no shutdown
Command Mode
Interface Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Shut down the routed port 1/0/9 :
T1600G-52TS(config)# interface gigabitEthernet
1/0/9
T1600G-52TS(config-if)# no switchport
T1600G-52TS(config-if)# shutdown
Содержание T1600-28TS
