Configuring VPN
Configuration Examples
Configuration Guide
145
Configuring the Router A
1) Choose the menu
VPN > IPSec > IPSec Policy
to load the following page. Click
Add
.
Figure 5-2 IPSec Policy List
2) The following page will appear. Specify the IPSec Policy Name as
tplink
and configure
the Mode as
LAN-to-LAN
as
the network is connected to the other network, then
configure other relevant parameters. Keep
Enable
selected as the Status of this entry.
Click
OK
.
Figure 5-3 Configuring the IPSec Policy
3) Choose the menu
VPN > IPSec > IPSec Policy
and click
Advanced Settings
to load the
following page. Advanced settings include IKEv1 phase-1 settings and IKEv1 phase-2
settings. You can keep the default advanced settings.
In the
Phase-1 Settings
section, configure the IKE phase-1 parameters and click
OK
.