![background image](http://html.mh-extra.com/html/tp-link/safestream-tl-r600vpn/safestream-tl-r600vpn_configuration-manual_1144817020.webp)
Configuration Guide
12
Configuring Network
WAN Configuration
Connection Type
Choose the connection type as Static IP if your ISP has offered you a fixed IP
address.
IP Address
Enter the IP address provided by your ISP.
Subnet Mask
Enter the subnet mask provided by your ISP.
Default Gateway
Enter the default gateway provided by your ISP.
Upstream
Bandwidth
Specify the downstream bandwidth of the WAN port. The value configured here is the
lower limit of the “Maximum Downstream Bandwidth” on
Transmission > Bandwidth
Control
> Bandwidth Control
page, to make “Bandwidth Control” take effect, please
ensure this parameter is set correctly.
Downstream
Bandwidth
Specify the downstream bandwidth of the WAN port. The value configured here is the
lower limit of the “Maximum Downstream Bandwidth” on
Transmission > Bandwidth
Control > Bandwidth Control
page, to make “Bandwidth Control” take effect, please
ensure this parameter is set correctly.
MTU
Specify the MTU (Maximum Transmission Unit) of the WAN port.
MTU is the maximum data unit transmitted in the physical network. When Static IP is
selected, MTU can be set in the range of 576-1500 bytes. The default value is 1500.
Primary/
Secondary DNS
Optional. Enter the IP address of the DNS server provided by your ISP.
VLAN
Add the WAN port to a VLAN. Generally, you don’t need to manually configure it
unless required by your ISP.
By default, the WAN port is automatically assigned to a VLAN, and the egress rule of
the VLAN is UNTAG, so the packets are transmitted by the WAN port without VLAN
tags. If you want the WAN port to transmit packets with VLAN tag, you need to create
the corresponding VLAN first and configure its egress rule as TAG, then manually
add the WAN port to that VLAN. To create VLANs, go to
Network
>
VLAN
>
VLAN.
Note
: When using the IPTV function, either in Bridge mode or Custom mode,
the router will automatically create corresponding VLANs after you finished the
configuration, and add port 1 (WAN1) to the VLANs. Users cannot then manually
select the VLAN that WAN 1 belongs to.