![background image](http://html.mh-extra.com/html/tp-link/safestream-tl-r600vpn/safestream-tl-r600vpn_configuration-manual_1144817021.webp)
Configuring Network
WAN Configuration
Configuration Guide
13
Configuring the PPPoE
Choose the menu
Network
>
WAN
>
WAN
to load the following page.
Figure 2-4 Configuring the PPPoE
In the
Connection Configuration
section, select the connection type as PPPoE. Enter the
corresponding parameters and click
Save
.
Connection Type
Choose the connection type as PPPoE if your ISP provides you with a PPPoE
account.
Username
Enter the PPPoE username provided by your ISP.
Password
Enter the PPPoE password provided by your ISP.
Connection
Mode
Choose the connection mode, including
Connect Automatically
,
Connect Manually
and
Time-Based.
Connect Automatically:
The router will activate the connection automatically when
the router reboots or the connection is down.
Connect Manually:
You can manually activate or terminate the connection.
Time-Based:
During the specified period, the router will automatically activate the
connection.
Time
Choose the effective time range when the
Connection Mode
is chosen as
Time-
Based
. To create the time range, go to
Preferences
>
Time
Range > Time Range
.
Upstream
Bandwidth
Specify the upstream bandwidth of the WAN port. The value configured here is the
upper limit of the “Maximum Upstream Bandwidth” on
Transmission > Bandwidth
Control > Bandwidth Control
page, to make “Bandwidth Control” take effect, please
ensure this parameter is set correctly.