Configuring Transmission
Routing Configurations
Configuration Guide
75
Description
Enter a brief description for the rule.
Status
Check the box to enable the rule.
6.2 Configuring the Policy Routing
Choose the menu
Transmission> Routing > Policy Routing
and click
Add
to load the
following page.
Figure 6-2 Configuring the Policy Routing
Specify the name of the policy routing entry and configure other related parameters. Then
click
OK
.
Service Type
Specify the service type for the rule.
Source IP
Enter the source IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
Destination IP
Enter the destination IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
WAN
Specify the outcoming port for the rule.
Effective Time
Specify the effective time for the rule.
Description
Enter a brief description for the rule.
Status
Check the box to enable the rule.