Toyota TNS350 Скачать руководство пользователя страница 92

Страница: 92 / 260

ADVANCED FUNCTIONS

Volume

The voice guidance volume can be

adjusted or switched off.

1. Push the “MENU” button.

2. Touch “Setting”.

3. Touch “Volume”.

To adjust the volume, select the desired

level by touching the appropriate number.
If voice guidance is not needed, touch

“Off”

to disable the feature.

When selected the number or

“Off”

will be

highlighted.

4. Touch “OK” to confirm your

selection.

INFORMATION

During route guidance, the voice

guidance continues even if the

navigation screen is changed to other

screens.

“Adaptive volume control”:

By turning

“Adaptive volume control” on, the volume

is turned up automatically when the vehicle

speed exceeds 80 km/h (50 mph).
To turn the “Adaptive volume control”

system on, touch the touch-screen button.

The indicator will be highlighted.

Содержание TNS350





































































































































































































































































Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды

Toyota TNS350, Руководство пользователя

Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды