Toyota TNS350 Скачать руководство пользователя страница 102

Страница: 102 / 260

ADVANCED FUNCTIONS

6. Touch the eight directional touch-

screen button to move the cursor

to the desired point on the map.

7. Touch “Enter”.

8. Touch either

to change

the size of the area to be avoided.

9. Touch “OK”.

INFORMATION

● If a destination is input in the area

to avoid or the route calculation

cannot be made without running

through the area to avoid, a route

passing through the area to be

avoided may be shown.

● Up to 10 locations can be registered

as points/areas to avoid. If there

are 10 locations already registered,

the following message will be

displayed: “Unable to register

additional points. Perform the

operation again after deleting

unnecessary points.”.

— Editing area to avoid

The name, location and/or area size of a

registered area can be edited.

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Memory” on the “Setting”

screen.

4. Touch “Edit”.

5. Touch the desired area button.

Содержание TNS350





































































































































































































































































Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды

Toyota TNS350, Руководство пользователя

Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды