Toyota TNS350, Руководство пользователя

Страница: 200 / 260

AUDIO SYSTEM
6
● RDS (Radio Data System)
AF (Alternative Frequency) function:
A station providing good reception is
automatically selected if current reception
worsens.
Each touch of “AF” changes as in the
following:
AF-ON, REG-OFF mode:
“AF” appears
on the screen. For switching over to
the broadcasting station providing good
reception within the same RDS network;
convenient for following the appropriate
stations in a wide region.
AF-ON, REG-ON mode: “AF” and “REG”
appear on the screen. For switching over
to a broadcasting station within the same
local program network.
AF-OFF, REG-OFF mode: The AF function
does not work.
TA (Traffic Announcement) function:
Push the “SOURCE” button and touch
“TA”.
The tuner will automatically seek a station
that regularly broadcasts traffic information
and the station broadcasts when the traffic
information program starts.
When receiving FM:
Push
“SOURCE”
button and touch
“TA”
to switch the radio mode to TP (Traffic
Program). “TP” will appear on the screen.
If the TP station is not received, the “TP”
will start flashing.
In the TP mode, the radio will begin seeking
a TP station. If the radio seek out a TP
station, the program name will appear on
the screen. If the TA station is received,
the radio will be switched to the traffic
information program automatically. When
the program ends, the initial operation
resumes. When also in AF mode, the radio
will seek a TP station by using the AF list.
Push
“SOURCE” button and touch “TA”
once again to switch the radio mode to
TA. “TA” will appear on the screen and the
radio will mute the volume of FM station.
In the TA mode, the radio will begin seeking
a TP station. It sounds only when a TA
station is received. When a TP station is
received, the program service name will
appear on the screen. When also in AF
mode, the radio will seeking a TP station
by using the AF list.
While the radio is seeking any TP station,
“TP SEEK” appears on the screen. If the
radio cannot seek out any TP stations,
“NOTHING” will appear on the screen for
2 seconds and start searching a TP station
again.
If the TP signal is halted for 20 seconds
after the TP mode was set, the radio will
seek another TP station automatically.