Toyota TNS350 Скачать руководство пользователя страница 59

Страница: 59 / 260

TNS 350

DESTINATION SEARCH

— Destination search by

“Previous”

1.  Push the “MENU” button.
2.  Touch “Destination”.
3.  Touch “Previous” on the “Destination”

screen.

The previous starting point and up to 100

previously set destinations are displayed

on the screen.

4. Touch the touch-screen button of

the desired destination.

The screen changes and displays the map

location of the selected destination and

the road preference. (See “Starting route

guidance” on page 67.)

INFORMATION

The list of previous destinations can

be deleted. (See “ — Deleting previous

points” on page 104.)

— Destination search by

“USB-destination”

The

“USB-destination”

button allows you

to read in and display the POI information

downloaded from a dedicated site on the

internet and stored in a USB memory

device.
Using the displayed POI information, you

can set a destination, register memory

points and make a phone call.
To download the POI information, access

the following URL and follow the instructions

at the site.
URL: http://my.toyota.eu

(a) Plugging or unplugging a USB

memory device

● Setting a USB memory device

Open the cover and plug a USB memory

device into the port.

INFORMATION

● Only files in the “TOYOTA”

folder and the root folder can be

displayed.

001.bmp

Not displayed

TOYOTA

004.jpg

002.jpg

003.bmp

Folder 1

005.bmp
006.jpg

● Up to 100 POIs in the USB memory

device can be displayed.

Содержание TNS350





































































































































































































































































Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды

Toyota TNS350, Руководство пользователя

Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды