Toyota TNS350 Скачать руководство пользователя страница 236

Страница: 236 / 260

AUDIO SYSTEM

INFORMATION

● Disconnecting or connecting the

portable audio device while in AUX

mode may lead to distortion and

speaker damage. Always ensure

to turn off the audio system power

or switch to another mode prior to

disconnecting or connecting.

● Changing the portable audio device

power supply while in AUX mode

may lead to distortion and speaker

damage. Always ensure to turn off

the audio system power or switch

to another mode prior to changing

the portable audio device power

supply.

● Please note that the volume level

will vary due to differing output

levels depending on the connected

device.

● If the volume is adjusted while in

AUX mode, the volume can be

stored as the volume level for

AUX mode. This stored volume

level will be returned to its default

setting if the portable audio device

is disconnected.

● When using a portable audio device

connected to the power outlet or

cigarette lighter, noise may occur

during playback.

If this happens, use the power

source (battery) of the portable

audio device.

(b) Operating a portable audio devices
1. Turn ON the portable audio device

power and playback music.

Refer to the instruction manual provided

with the portable audio device for details

of operation.

2. Push the “SOURCE” button and

touch “AUX”. The system is switched

to the AUX mode.

Played back audio from the portable audio

device is output from the speakers.

Содержание TNS350





































































































































































































































































Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды

Toyota TNS350, Руководство пользователя

Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды