Toyota TNS350 Скачать руководство пользователя страница 4

Страница: 4 / 260

Important information about

this manual

For safety reasons, this manual indicates

items requiring particular attention with the

following marks.

CAUTION

This is a warning against anything

which may cause injury to people if the

warning is ignored. You are informed

about what you must or must not do

in order to reduce the risk of injury to

yourself and others.

NOTICE

This is a warning against anything

which may cause damage to the

vehicle or its equipment if the warning

is ignored. You are informed about

what you must or must not do in order

to avoid or reduce the risk of damage

to your vehicle and its equipment.

INFORMATION

This provides additional information.

Appearance and specifications are

subject to change without notice. All

rights reserved. No part of this publication

may be reproduced, without prior written

permission from Toyota Motor Europe.

Safety Instruction

To use this system in the safest possible

manner, follow all the safety tips shown

below.
This system is intended to assist in reaching

the destination and, if used properly, can

do so. The driver is solely responsible for

the safe operation of your vehicle and the

safety of your passengers.
Do not use any feature of this system to

the extent it becomes a distraction and

prevents safe driving. The first priority

while driving should always be the safe

operation of the vehicle. While driving, be

sure to observe all traffic regulations.
Prior to the actual use of this system,

learn how to use it and become thoroughly

familiar with it. Read the entire Navigation

System Owner’s Manual to make sure you

understand the system. Do not allow other

people to use this system until they have

read and understood the instructions in

this manual.

Содержание TNS350





































































































































































































































































Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды

Toyota TNS350, Руководство пользователя

Результаты поиска

Содержание TNS350

Отзывы:

Бренды по названию

Популярные бренды