Fig. 85: Measuring Resistance Between Terminals THA And E2 Using Ohmmeter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Resistance:
RESISTANCE SPECIFICATION
If the resistance is not as specified, replace the MAF meter.
b. Inspect operation.
a. Connect the MAF meter connector.
b. Connect the negative (-) terminal cable to the battery.
c. Turn the ignition switch ON.
d. Using a voltmeter, connect the positive (+) tester probe to terminal VG, and negative (-)
tester probe to terminal E2G.
-20°C (-4°F) 13.6 to 18.4 ohm
20°C (68°F) 2.21 to 2.69 ohm
60°C (140°F) 0.49 to 0.67 ohm
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:51 PM
Page 89
© 2005 Mitchell Repair Information Company, LLC.