Be sure to check the DTC before disconnecting the negative (-) terminal cable from the battery.
b. When installing the battery, be especially careful not to incorrectly connect the positive (+) and
negative (-) cables.
c. Do not give a severe impact to the SFI parts during removal or installation. Handle all the SFI parts
carefully, especially the ECM.
d. Be careful during troubleshooting. Numerous transistor circuits are used and even slight terminal
contact can cause further troubles.
e. Do not open the ECM cover.
f. When inspecting during rainy weather, take care to prevent entry of water. Also, when washing the
engine compartment, prevent water from getting into the SFI parts and wiring connectors.
g. Parts should be replaced as an assembly.
h. Care should be taken when pulling out and inserting the wiring connectors.
1. Release the lock and pull out the connector, pulling on the connectors.
2. Fully insert the connector and check that it is locked.
i. Use SST for the inspection or test of the injector or its wiring connector.
SST 09842-30080
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:50 PM
Page 2
© 2005 Mitchell Repair Information Company, LLC.
