1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
Fig. 102: Checking Continuity Between Terminals 1 + 2 & No Continuity Between
Terminals 3 + 5 Using Ohmmeter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
If there is continuity, replace the relay.
b. Inspect the relay operation.
1. Apply battery positive voltage to terminals 1 and 2.
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:51 PM
Page 105
© 2005 Mitchell Repair Information Company, LLC.
