1.
REMOVE LH REAR SEAT
2.
REMOVE FLOOR SERVICE HOLE COVER
3.
DISCONNECT FUEL PUMP & SENDER GAUGE CONNECTOR
4.
DISCONNECT VAPOR PRESSURE SENSOR CONNECTOR
5.
DISCONNECT FUEL TANK MAIN TUBE
Remove the tube joint clip and disconnect the main tube.
Fig. 28: Removing Tube Joint Clip & Disconnecting Main Tube
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6.
REMOVE FUEL PUMP AND SENDER GAUGE ASSEMBLY FROM FUEL TANK
a. Remove the 8 bolts and fuel tank vent tube set plate.
CAUTION:
Disconnect the fuel tube connector (quick type) observing the
precaution (see SFI SYSTEM ).
As there is retained pressure in the fuel line, prevent it from
splashing inside the luggage compartment.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:50 PM
Page 31
© 2005 Mitchell Repair Information Company, LLC.